Commercial Industrial Popcorn Machine

A 1,400 W popcorn machine with a 50–250°C range on a 550 × 412 × 740 mm body, 14.9 kg net. The height is the giveaway: the kettle sits above a warmed holding base, so popping and display happen in the same unit.

Temperature control matters more than power here. Corn needs a specific heat to pop fully without scorching, and the range on this machine lets the kettle be set for a batch while the base below holds the finished corn warm and crisp.

It is used at cinemas, markets, fairs and shops selling popcorn by the bag. It pops and holds; bags, seasoning and serving are separate.

Kettle Above, Warmer Below

• 50–250°C control: a kettle set for popping, with a lower heat on the base for holding without steaming the finished corn.
• 1,400 W: output to bring a kettle batch up quickly and recover between loads.
• 740 mm height: kettle at working height above a display base, so one operator can pop and serve.
• 14.9 kg: heavy enough to stay put through a service, light enough to move on a cart or bench.

Key Specifications

• Power: 1,400 W, 110/220 V, 50/60 Hz
• Temperature range: 50–250°C
• Product size: 550 × 412 × 740 mm
• Weight: 14.9 kg net
• Configuration: popping kettle above a warmed holding base
• Variants: carts and warmers for mobile vending are offered separately — compare in the images below

Build Details

The kettle is the working part and the base is the display. Corn that stays in a closed kettle after popping goes soft; corn that drops into a warm base stays crisp for the length of a service.

Controls sit on the front with the kettle switch separate from the base heat, so the two can be run independently. The kettle empties by a release rather than being lifted out hot.

Oil and corn ratio decides the result more than the temperature does. Too much oil and the corn is greasy and the base turns sticky; too little and the kettle scorches between batches.

Where It Works

• Cinemas and venue concessions
• Markets and street fairs
• Shops selling popcorn by the bag
• Event and festival stalls

Dimensions and Packing

Product size 550 × 412 × 740 mm. Net weight 14.9 kg. Kettle above a warmed holding base. Plug type is confirmed against the quotation.

Frequently Asked Questions

1. What is the minimum order quantity?

10 pieces, with monthly capacity up to 1,000 units.

2. What is the lead time?

20–25 days after order confirmation; samples in about 7 working days.

3. Does it keep popcorn warm after popping?

Yes. The base below the kettle is heated, so finished corn stays warm and crisp during service.

4. What temperature does it reach?

The range runs from 50°C to 250°C, controlled on the machine.

5. Which voltages are available?

Runs on 1400 W at 110 V or 220 V, 50/60 Hz, with the plug specified for the destination market.

6. Can it be used on a cart?

Yes, with a cart rated for its weight and footprint. Carts are offered separately.

7. What does the warranty cover?

One year against manufacturing defects, with spare parts support afterwards.